I’m Christopher Bahan, an A&P mechanic with Inspection Authorization and an ATP-rated former airline pilot. Bonanzas and Barons are long-lived airplanes, and many on the market are decades old, with a long trail of owners, modifications and maintenance shops. A good one is a great airplane. A tired one can cost a buyer a lot after the sale.
My training includes an American Bonanza Society seminar with Continental Motors in Fairhope, Alabama.
What I check on a Bonanza or Baron
The Bonanza and Baron are close relatives, with much of the same structure, landing gear and systems, so the inspection is nearly identical. A Baron simply has two of everything on the engine side. On every Bonanza and Baron pre-buy and annual, I use the American Bonanza Society inspection guide.
- Records: airframe, engine and propeller logbooks, AD compliance, damage history, modifications and STC paperwork, and weight and balance.
- Engines: the Continental engine (both of them on a Baron), with compression, borescope of every cylinder, and an engine run watching pressures and temperatures.
- Full-power fuel flow: checked on an evaluation flight, on both engines on a Baron. A Continental engine needs its full rated fuel flow at takeoff power, and the only way to verify it is at full power in flight.
- Fuel system: fuel cells, lines and fittings, checked for leaks and stains.
- Landing gear: the retract system, gear doors, linkages and a gear swing on jacks.
- Tail and flight controls: ruddervators on V-tails, control cables, hinges and attach points.
- Airframe: corrosion, cracks and the condition of the structure, belly and wing attach areas.
- Systems: propellers, electrical, avionics and autopilot.
- Baron twin systems: both engines, both props and both fuel systems, plus the cabin heater and the systems that come with a twin.
The evaluation flight is where the fuel flow check happens. It also shows what a ground inspection can’t, such as temperatures at full power, and how the airplane and its avionics perform in the air. On a Turbo 210 pre-buy, this check found fuel flow 2.1 GPH below the minimum at takeoff power, which a ground-only inspection would have missed. See that case.
From Bonanza owners
★★★★★
“Chris did an excellent job on an annual on our BE-35 v tail bonanza. He was quick and reasonable and was able to travel to the airplane. I would definitely recommend him for any repairs or inspections you might need in the Houston area.”
— Luke S., Google review
★★★★★
“Chris did a fantastic job on our BE35J annual inspection. Thanks for the excellent service!”
— Adam S., Google review
What does a Bonanza or Baron pre-buy cost?
It depends on the scope you choose and the travel to reach the airplane. Send me the listing and I’ll give you a firm quote for that airplane, with travel included, before you commit. See what goes into the cost.
Bonanza & Baron pre-buy FAQ
Do you inspect both V-tail and straight-tail Bonanzas?
Yes, including the 35 series V-tails, the 33 and the A36.
Do you inspect Barons too?
Yes. A Baron gets the same inspection as a Bonanza, with both engines and props checked and fuel flow verified on both engines in flight.
Can you inspect a Bonanza or Baron outside Texas?
Yes. I travel to the aircraft anywhere in the U.S., so it doesn’t need to be flown anywhere before you own it.
Can the inspection be turned into an annual?
When it’s practical, such as an airplane in the Houston area, a comprehensive pre-buy can be rolled into an annual if you buy, with credit for the inspection work already done. For an airplane across the country, the annual is usually done by a shop near the aircraft.
Built around the American Bonanza Society inspection guide
The American Bonanza Society, the type club for Bonanzas and Barons, publishes a Prepurchase Inspection Checklist for its members. I use the ABS inspection guide on my Bonanza and Baron pre-buys and annuals, so the inspection covers what the type club says to check. If you’re buying a Bonanza or Baron, I also recommend joining ABS.
Buying a Bonanza or Baron?
Send me the listing and I’ll do a free preliminary logbook and history review before you sign. See a sample inspection report or more real pre-buy findings.
Where I’ve inspected: hundreds of pre-buys in Houston and across Texas, plus inspections in Florida, Mississippi, Tennessee, Maryland, Arizona, California, Washington, Idaho and Canada.
